This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

These tube connector halves are used for reliable connection of 34 mm steel tubes for drive shafts. Compared to heat-welded connection our tube connector halves offer higher stability and durability. The connector halves are bolted to the steel tubes with the included M8x50 bolts. Material: Steel, galvanized

This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized

Das ideale Rollschirmrohr für Single-Rollschirme. Es ist ausgestattet mit einer Nut zum Einführen des Gewebes.Material: Aluminium

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 27 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used, for example, in TGU TransAxle Unit.It fits 27 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

<p>The Tower Roller Plus Set is part of our Tower Roller Plus drive system, which features the following properties:</p> <ul> <li>Drive system for medium and large roller screens, as well as rollable side vents and room partitions.</li> <li>Suitable for system lengths up to 120 meters with an extremely narrow installation depth of approximately 80 mm.</li> <li>Reduced weight, assembly time, and costs.</li> <li>Extremely durable and almost maintenance-free, thanks to the high-strength plastic rollers and the standard anodized aluminum profile.</li> <li>Reduced risk of accidents due to completely integrated and covered counterweights and pulleys.</li> <li>Integrated cable routing with energy chain.</li> <li>Compatible with all common motors (counterweight is adjusted accordingly).</li> </ul>

The perfect tube for twin roll-up screens. It is equipped with two notches for inserting the shade cloth. Material: Aluminum

This adapter gets inserted in telescopic systems in between the built-in U-joint and the steel tubes. It is suitable with 34 mm tubes with a wall thickness of 2,5 mm and 32 mm tubes with 1,5 mm wall thickness.It specially fits the TGU TransAxle Unit as well as single and double U-joints. Material: Galvanized steel

Our purlin clips are used to attach a roll-up fabric to purlins in greenhouses.Material: Stainless steel

This adapter is inserted in telescopic system to connect built-in U-joint and the steel tubes. The extended version allows to use a spacing roller like it is used,for example, TGU TransAxle Unit.It fits 32 mm tubes with a wall thickness of 1,5 mm.It is a perfect solution for TGU TransAxle Unit as well as for single and double U-joints. Material: Galvanized steel

This can be used in roll up screen systems to connect the telescope and roll up screen tube.

This adapter gets inserted in roll up screen systems in between the gear motor RW 45 and a 50 mm roll up tube. It specially fits the TGU Tower Roller Plus System.Material: Milled aluminium

The splices are getting inserted into the roll-up tube. Aluminium rivets provide a reliable hold. The splices are compatible with aluminium tube 50 type I and II. Material: aluminium

This rail is a guide for motor mount and counter-weight in Tower Roller Plus System. The counter-weight side of the rail is equipped with a slot for a plastic cover to be inserted as a protection from accidents. The guide rail can be attached very quickly into the Tower Roller System. It is very stable and perfectly suitable for roll-up screens.

The poly lock aluminium profile is a practical solution for fixing your greenhouse film. It can be screwed onto the greenhouse structure with a mouting bracket quickly and easily. The film is inserted into profile and afterwards fixed with the two-piece PVC clamping strips. The two-piece construction simplifies assembly and prevents damages.Material: aluminium

This adapter gets inserted in roll up screen systems in between the gear motor RW 240 and a 63 mm roll up tube. It specially fits the TGU Tower Roller Plus System Material: Milled aluminium

This adapter gets inserted in roll up screen systems in between the gear motor RW 45 and a 50 mm roll up tube. It specially fits the TGU Tower Roller Plus System.Material: Milled aluminium

This adapter gets inserted in roll up screen systems in between the gear motor RW 240 and a 63 mm roll up tube. It specially fits the TGU Tower Roller Plus System Material: Milled aluminium

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 32 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel