Filter
Bolted chain coupling for RW45 - tube
Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling is equipped with a pre punched receptacle for the drive shaft, in which it can be easily inserted. The mounter benefits from an easier and quicker mounting compared to the usual welding. The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Ridder Art.-Nr.: 590001
0,00 €*
Chain bolted coupling for RW 240/400/600/800 tube 1''
Version: Tube Ø 1 "
The chain coupling connects an existing chain wheel at the gear motor with a drive shaft and help tos to create a more flexible drive system. The coupling gets heat sealed on top of the drive shaft. The double chain of this coupling enables the drive shaft to move in the line. This construction creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: Galvanized steelRidder Art.-Nr.: 590016
0,00 €*
Lock EWA 12.2505 / 250 Nm / 400 V - 4,4 rpm - We 66
250 Nm 400 V 3~, 50 Hz 4,4 Umdrehungen/Minute 0,30 kW 1,10 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
0,00 €*
Power drive Lock EWA 10.0505 50 Nm 5,6 U/min - Welle 06 400V - 12210.0505.06
50 Nm400 V 3~, 50 Hz5,6 Umdrehungen/Minute0,11 kW0,45 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
0,00 €*
Lock EWA 12.1505 / 150 Nm / 400 V / 50 Hz / E20 - 4,3 rpm - We 66
150 Nm 400 V 3~, 50 Hz 4,4 Umdrehungen/Minute 0,17 kW 0,90 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
0,00 €*
Chain coupling for RW 45 - tube
Version: Tube 1"
Chain coupling connects motor gearbox chain wheel with a drive shaft and provides higher flexibility of the driving system.The coupling gets welded to drive shaft.The duplex chain of this coupling enables the drive shaft to move in the line. Such a structure creates the higher flexibility of this drive system during dynamic external influences and during movements within the greenhouse construction. Material: galvanized steelRidder Art.-Nr.: 590000
0,00 €*
Motor gearbox Ridder RW 241-09/400/3/86//IP55
Ridders' electronic gear motors for shading and ventilation systems have pre- installed chain wheels, which work as a receptacle for the chain coupling. Ridder Art.-Nr. 537200
0,00 €*
Lock EWA 12.1505 150 Nm / 400 V / 50 Hz / E20 - 4,3 rpm - We 06
150 Nm 400 V 3~, 50 Hz 4,4 Umdrehungen/Minute 0,17 kW 0,90 AmpereExtrem leises, selbsthemmendes Doppel-Schneckengetriebe mit hoher Lebensdauer, wartungsfrei.Universelle Montage durch Standard-Befestigung (Füße abnehmbar) hinten oder optional seitlich links (symmetrisch)!Eingebauter Präzisions-Zahnradendschalter END 20 für 580 Wellenumdrehungen (Mikroschalter in cURus).Zur Verkabelung 7-adriges Kabel verwenden.
0,00 €*
Motor console for EWA 10+12
With this motor bracket, you can use an EWA10 or EWA12 motor for your ventilation drive in continuous ridge ventilations. very easily on IP supports.Screwing on the saves you tedious and dangerous welding work on the IP support. girder. It is only necessary to drill two holes through the motor bracket. Tolerances are compensated for by elongated holes in the motor bracket.
0,00 €*
Ridder Mounting plate RSD\105\E\H340-495 - for motor gearbox RW240/400/600-RSD250 - von 340-495 mm
The vario-motor mounts enable you to flexibly attach your gear motors within the area of the truss in greenhouses. Thanks to a variable hole pattern the motor mount can be positioned at different heights of the truss. This component can be used in greenhouses with central drive and with gable end drive. Material: Galvanized steelRidder Art.-Nr. 503500
0,00 €*
Protection Cover - 2-parts for RW 200-600
The protective cover is your secure housing for drives that are placed mounted outside and exposed to rain, snow and other weather conditions. The cover fits Ridder drives series RW 200 until RW 600.Material: Plastic, UV-stabilized
0,00 €*
Motor mount TGU S 400.600 RW 200 - 600 for motor gearbox RW 200 - 600 (square tube Vierkantrohr 50x50) - for suspended shading systems
The motor mount puts the drive shaft into the perfect position for the drive system. This model is suitable for suspended shading systems and makes installation easy, because there is no need to place drive shaft manually. The square tubes can directly be inserted onto the motor mount during construction. The motor mount is compatible with the gear motor RW 200, 400 and 600 Material: Galvanized steel
0,00 €*
Mounting braket square tube 50 x50 on I beams + angles - PU = 20 pcs
The stable solution for fastening square tubes to double IP carriers. With the flange set, the pipes can be attached to the IP carriers without welding. This makes assembly easier and improves stability.Different sizes of IP carriers are covered with the flange set
0,00 €*
Protection Cover - 2-parts for RW 45
The protective cover is your secure housing for drives that are placed mounted outside and exposed to rain, snow and other weather conditions. The cover fits Ridder drives series RW 45 Material: PlasticArt.-no. 580050
0,00 €*
Motor mount 50x50 Lock
The motor mount puts the drive shaft into the perfect position for the drive system. This model is suitable for suspended shading systems and makes installation easy, because there is no need to place drive shaft manually. The square tubes can directly be inserted onto the motor mount during construction. The motor mount is compatible with the gear motor RW 200, 400 and 600 Material: Galvanized steel
0,00 €*