Products
AquaDropz - The irrigation bag for relaxed stock irrigation.Water bag for mobile drip irrigationMaterial PE with textile compound, UV-resistantapprox. 420 g/pieceapprox. 75 litersWatering bag made of green polyethylene with black reinforcement strip at the bottom androbust nylon zipper.The bag has drainage points on the bottom and empties in 4 - 9 hours, depending on thesubstrate. The Aquadropz mobile drip irrigation system is UV stabilized. For filling hoses up to 6 cm in diameter.Simple bags can be used for trunk circumference up to a maximum of 10 cm. For trunkswith a circumference of more than 10 cm and up to 20 cm, two bags should be used.The irrigation bag can be used only if the lower trunk of the tree is free of branches up to a height ofof approximately 70 cm is free of branches.Advantages:  -  -  - perfect for freshly planted young trees  -  -  - targeted and highly effective water distribution, even in depth for a longer  -  -  - lasting water supply in the soil  -  -  - set up in a few minutes without tools  -  -  - water only 1-2 times per week, or top up as needed  -  -  - discreet appearance, blends ideally into the landscape  -  -  - promotes deep root growth  -  -  - saves time and water by effectively saturating and storing water  -  -  - can also be filled with water containing nutrients/fertilizers  -  -  - can be quickly and easily expanded to effectively water larger trees thanks to the nylon zipper  -  -  - can be used as a stand-alone mobile drip irrigation system
An lightproof, but extremely absorbent fleece for optimal water storage and distribution.The Aquafil irrigation mat is a further development of the standard irrigation mats. Aquafil can be laid very neatly. Thanks to its high-capillary fibres the water is evenly distributed even on imperfect surfaces, that provides an optimal supply of water to your plants.Pre-cut sections of 30 x 50 cmCapacity: approx. 3l / m²Weight: 200 g / m²
AquaPlus protects the watering mats on your plant tables from algae formation.The perforation provides optimal irrigation of your plants.The checkered pattern (8 x 8 cm) helps to equally place your plant pots.
Our standard watering mat 300 is used on greenhouse tables and is available in various widths from 11,5 to 320 cmIt saves water for a long period of time for plants to contineously absorb it. Thus, a constant water supply is maintained with little effort.The storage capacity is about 3 liters / square meter.
Product: FilmProtect stabilizing tape Width: approx. 2.8 cm Length: 100 m (roll) Packaging unit: 1 roll Application area: Fastening and protecting bubble wrap on greenhouse walls Material: Durable, weather-resistant plastic tape Function: Reinforcement at clamping points, tear-out protection, wind stabilization Advantages: Extends the lifespan of the film, easy to install, large-area fixation The FilmProtect stabilizing tape, with a width of approx. 2.8 cm, is designed for professional fastening of bubble wrap to greenhouse walls. It is applied at the clamping points of the adhesive fasteners and protects the film from excessive stretching and mechanical stress. Thanks to its large-area fixation, the tape also acts as wind protection and reliably prevents the film from tearing out—even in strong gusts. Installation is quick and efficient, for example using compact wire tensioners.
Application area: Guiding irrigation hoses in garden and greenhouse installations Material: Galvanized metal anchor with plastic guide for high stability Total length: 57 cm Metal spike length: 31 cm Plastic guide length: approx. 18 cm The Galvanized hose guide roller with plastic roller enables precise guidance of irrigation hoses around corners and obstacles. This protects both the hose and adjacent areas such as garden beds or building corners from damage. Thanks to the long metal spike and sturdy plastic guide, the hose roller remains securely anchored even under strong pulling forces. This solution is particularly suitable for firm soils and demanding garden or greenhouse environments.
Our film fasteners are applied for attaching a bubble wrap as an additional isolating material to greenhouse walls (glass or twin-wall sheets).Bubble wrap is impaled onto the bottom part of the film fastener previously sticked with silicon onto the wall. Afterwards the upper part of the film fastener is screwed up from above to firmly fix the bubble wrap. The upper part of the film fastener can easily be unscrewed to be newly applied during winter seasons.
Closed energy fabric with appr. 65 % shading level and appr. 61% energy saving value.Very good moisture exchange is ensured by the interwoven yarns acrylic.B1 heavy-flammability certification for the European market is available.Woven tapes allow direct attachment of the S-hooks.Note:Further processing such as cutting and sewing is not included the price.