This lead edge tube clip 19 L connects support wire with 19 mm aluminium tubes in shading systems. Compared to the S 19 model, the clip L 19 provides a larger distance between the tube and wire. In some greenhouse types this ensures better sealing, when the energy screens are closed.

Our screen hooks are used to fasten screens overhangs onto clip profile. The hook is equipped with a special self-locking fastener.

With this Inox truss-clip you are able to attach poly wire firmly to the truss in shading systems. The truss clips are slipped on to the truss from beside and are deliverable in different heights.Material: stainless steel

The sealing bracket seals the screen paths in suspended and lay-flat shading systems. This piece is made of plastic, that preserves the shade cloth. The bracket gets installed at the support wire to collect the following screen wih the help of the cord. Material: plastic

The wire guide protects the poly wire in lay-flat energy screens from friction, caused by the screen profile. In suspended systems it works as a connection between support wire and screen profile. The wire guide is installed into the screw channel and can slide sideways within it.Material: plastic

With these crints poly wire is attached securely to the support wire bracket universal and afterwards it gets bolted. Material: Steel, galvanized

This plastic insert is used to protect polyester wires, which are passed through holes in metal profiles.Thanks to a notch the component can be locked in the plate, so that a firm grip is guaranteed.The wire guide is suitable for profiles with a maximum thickness of 4 mm.Material: Plastic

The table clamp 27.40 connects the 27 mm push rod with 19 mm tubes or screen profiles, which are guiding the shade cloth. This model perfectly suits your needs, if you are using thin shade cloth and therefore your construction has a smaller space between the fabric.

Our compact wire tigthener is very helpful by installing wires in narrow areas of shading systems and other constructions. The tightener provides more stable position of your cables and wires ,than other tigthener do.(Fixing only M6)

The wire guide clip universal is used for attaching wind-wire to the screen profile I and II in shading systems Material: Stainless Steel

The universal fastener G I attaches wires at the greenhouse construction quickly and easily by punching. The fastener has with three drill holes. Material: Galvanized steel

The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC

The support wire bracket is used for easy fixing of inox- wire onto square tube.The wire bracket gets clipped and screwed onto the square tube. Thanks to this fixation it can withstand high tension. For screwing you will need a M 6x65-bolt which is not delivered with the product.

With these crints poly wire is attached securely to the support wire bracket universal and afterwards it gets bolted. Material: Steel, galvanized

These s-hooks can be used to hang various wires and parts in greenhouses.Material: Galvanized steel

The table clamp 27.40 connects the 27 mm push rod with 19 mm tubes or screen profiles, which are guiding the shade cloth. This model perfectly suits your needs, if you are using thin shade cloth and therefore your construction has a smaller space between the fabric.

This universal wire-tightener gets used for tightening of all cords and wires in shading systems and other constructions.

The 2 mm inox wire is the perfect support wire for suspended shading systems. Thanks to its polished surface the s-hooks slip over this wire very smoothly. Tensile strength:1300 NmMaterial: Stainless steel

This poly wire is used as support wire for lay flat shading systems or as an attachment wire for fabric-stripes. It is used in greenhouses with common roofing. Material: Polyester

This poly wire is highly UV-resistant. Therefore it is suitable for greenhouses with a high UV-penetrability. It can be used as support wire for lay flat shading systems or as an attachment wire for fabric-stripes.Material: Polyester

The wire guide clip TGU attaches support- and wind-wire to the screen profile I-II. It is specially suitable for shading systems with large-volume shading fabric. Material: Stainless Steel

This wire tightner enables quick and easy mounting of Inox-wire in suspended shading systems. The component was especially designed for the construction of suspended systems and therefor it offers a perfect mounting position for this function. After its attachment to the system the wire tightner is adjustable to the left and the right. Mounting requires a M 6x65 bolt. This is not delivered with the product. The wire tightner gets used in numerous additional application fields where cord and wire has to be strained.

With TGU wire clip guide you can attach support- and wind-wire onto the screen profile V. The guide is constructed in a way that enables a flexible and easy attachement to the screen profile. With the help of the clip guide you can tighten the poly wires and afterwards clip them on the screen profiles. Material: plastic