Filter
Cable track 10x16 / segments =204 mm - PU = 100 pcs
Größe:: 10x16 | Version:: 204 mm
This 10 x 16 mm energy chain was made to protect cable in all kind of roll up screens. Besides that the energy chain enables a controlled unroll movement. This energy chain is easy to connect and disconnect - even while the cable is already inserted. This saves time during handling and offers a secure cable protection. Out of greenhouses there are many applications and industries in which the energy chain gets used. Commonly it can be used to protect every kind of flexible cable and wire. The energy chain is provided in pieces of 204 mm each.Material: Plastic
0,00 €*
Guiding unit for tube motor RB40 /50/ TGU
This is a standard motor guide that works as a receptacle for the 10 x 10 mm mounting pin of the tube motors RB 50 and FL 50. It moves the tube motor on the guiding profile. The motor guide is equipped with a mounting bracket for a mounting pin 10 x 10. Material: Hot-galvanized steel
0,00 €*
FRM50-tube motor-50-12-230
A TGU durable and robust tubular motor can be mounted onto 50 mm and 63 mm roll up tubes.The motor has a voltage of 230 V for European market. A variant of 120V for the American market is also available on request.The limit switches can be easily adjusted from the outside with an Allen key.The tubular motor is delivered with a 10x10 mounting bracket to be set onto the motor guide.
0,00 €*
Roll up bracket for energy chain
Our roll up bracket is used to attach the energy chains to your motor guide.The bracket has pre punched mounting holes for various directions of fixation. Material: Galvanized steel
0,00 €*
Guide rail for tube motor 7000 mm
Length (mm): 7000
The guide profile for tubular motors in conjunction with our roller carriage ensures, that your tubular motor is guided straight in roll up systems.
0,00 €*
Mounting bracket for tube motor 10 mm
This mounting bracket carries the 10 x 10 mounting pin of the tube motor. Therefore it gets installed at the left or the right side of the motor guide - depending of the position of the tube motor.Material: Steel
0,00 €*
Adjusting switch RB50E+ / RB120E+ - Ridder Art. Nr.:772001
Adjusting switch is used to set up the end switches in tube motors RB 50 E+ and RB 120 E+.
0,00 €*
Mounting bracket for tube motor 16 mm
This mounting bracket carries the 10 x 10 mounting pin of the tube motor. Therefore it gets installed at the left or the right side of the motor guide - depending of the position of the tube motor.Material: Steel
0,00 €*
Tubular motor bracket 50.50 with insert 10x10 and 16x16 mm
The tubular motor holder brings the drive shaft into the appropriate position for the drive system.It is suitable for suspended shading systems with gable drive. The fitter benefits from the easy handling of the bracket, as the drive shaft does not have to be aligned manually.The bracket is perfectly matched to a 50 mm square tube and only needs to be secured with a bolt including nut.
0,00 €*
Roll up bracket, angeled for energy chain - RB 50 E+
Version: Angled
Our roll up bracket is used to attach the energy chains to your motor guide.The bracket has pre punched mounting holes for various directions of fixation. Material: Galvanized steelRidder Art.-Nr. 423123
0,00 €*
FRM120-tube motor-120-7-230
A TGU durable and robust tubular motor can be mounted onto 50 mm and 63 mm roll up tubes.The motor has a voltage of 230 V for European market. A variant of 120V for the American market is also available on request.The limit switches can be easily adjusted from the outside with an Allen key.The tubular motor is delivered with a 16x16 mounting bracket to be set onto the motor guide.
0,00 €*
guiding unit RB50E+\L (left)
This motor guide works as a special receptacle for the tube motor RB50 moving it along the guiding profile. The motor guide is equipped with extended fastener and a bearing. It is applied with the motors in the right-side position. It has two holes for the mounting bracket. Material: Steel
0,00 €*
Endguide with bearing for tube motor 50 mm
Version: 50 mm
The endguide with bearing provides roll up tubes guiding at the side, that faces the tube motor. Therefore it is installed into the roll up tube. Material: aluminium
0,00 €*
Ridder Adaptor-Set RB50E+\L - Art-no. 550411
Um den Vorgänger des RB50Eᵖˡᵘˢ-Rohrmotors (RB50, mechanischen Endschaltersystem, 550024 und 550162) auf einfache Weise ersetzen zu können, verfügt der RB50Eᵖˡᵘˢ-Rohrmotor seit November 2016über einen quadratischen VK10-Adapter (550032 und 550039).Für den Austausch eines RB50Eᵖˡᵘˢ-Rohrmotors vor November 2016 (elektronischen Endschaltersystem, 550031), ist ADAPTERSATZ 550411 erhältlich.Ridder Art.-Nr. 550411
0,00 €*