Filter
–
Diabolo roll 27.32 - PU = 1000 pcs
PU (Pcs): 1000
The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
0,00 €*
Pinion house unit for rack Ridder TU6-30
Version: TU6-30
The pinion house unit TU 6-30 works as a drive for racks 30 in greenhouse ventilations. A counter roller enables reliable and gentle guidance of the rack. Therefore you will profit from low abrasion of your ventilation system.Thanks to a centred bronze ring, that works as a bearing, the pinion house unit especially fits simple and light-weight ventilation systems. For drives with 34 mm steel tubes. Material: Steel housing with a plastic bearing Ridder Art.-Nr.: 500018
0,00 €*
Grease waterproof 400 g - PU = 24 pcs
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.
0,00 €*
Rack 30-3\792 mm \ Ridder TU11-30
Length (mm): 792 | Version: Straight
This rack is especially suitable for standard ventilation in all types of greenhouses.The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 30 mmMaterial: galvanized steelRidder Art.-Nr.: 418546
0,00 €*
Window connector for TU11-22 +TU11-30PU = 10 pcs
The window bracket help to fix racks to the ventilation flap in greenhouse ventilations. The included Inox M6-bolt fixes the rack reliably into the connector. To fix the bracket to the ventilation flap, two further M& bolts are needed. These are not included.Material: aluminium pressure-castingRidder Art.-Nr.: 500021
0,00 €*
diabolo-roll 27.32 with stamped metal housing
PU (Pcs): 1
The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet
0,00 €*
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Size Ø: 27
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
0,00 €*
Grease waterproof 5 Kg
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.Comes in a bucket.Ridder item no .: 182051
0,00 €*
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
The pinion house unit TU 21-40 is used as a direct drive for shading systems with push-pull tube drives. Material: galvanized steel, pinions are hardend especially
0,00 €*
Counter-plate 45x45x5\D09\VZ
Counter plate is used as an insert for fixing RSD250 tooth-racked drives onto the truss.
0,00 €*
Pinion house protection cover 2-parts - incl. bolts 42000418 (4x) - PU = 25 pcs
With the pinion housing protection in combination with the rack protection tubes, racks can be protected at sensitive positions in the greenhouse. These can be, for example, places where there is a risk of injury or where contamination by lubricants must be avoided.The plastic protective housing is equipped with a two-sided receptacle for rack protection tubes. The housing is screwed on with galvanised M 4x16 steel screws.In combination with insect protection mesh, this set is suitable for realising an insect-free greenhouse, as it provides a two-sided receptacle for protective tubes.Material:Housing: plasticTube: aluminium
0,00 €*
Diabolo roll 27.32 Set 3 with variable mounting plate
PU (Pcs): 1
This diabolo roll serves as a guide for push tubes in shading systems with push-pull tube drives. This model is constructed with a rotatable plastic application and therefore it can be used in different mounting positions. Plastic lamination contributes for aligning the push-pull tubes. This diabolo roll is available on different mounting plates. Material: Diabolo roll: PlasticHousing: Iron Sheet
0,00 €*
Centerclip for centring shaft tube TUS 25-40- 50 pcs.
The center clip is used for centring the drive shaft during the installation of a weld coupling.When a damaged pinion needs to be replaced, the center clip enables to unclamp the drive shaft without demounting other pinions from the system. Material: Stainless SteelRidder art.-no.: 418694
0,00 €*
Sleeve coupling P26.5
This sleeve coupling is suitable for the drive shafts of 34 mm in push-pull drive tubes in shading and ventilation systems. It enables to unclamp the drive shaft from the system in case, for example, a damaged pinion should be replaced.. Material: galvanized steelRidder Art.-Nr.: 419404
0,00 €*
Safety cover for racks - Extension 50 cm
This article can be added to your safety sets for racks (three and four parts). Order the extension that you need on top of the standard one meter covers, and we will cut the covers to the requested length.
0,00 €*
Rack 22-3\1546mm \ Ridder TU11-22
Length (mm): 1546 | Version: Straight
This rack is especially suitable for light-weight ventilation in poly tunnels and -greenhouses. The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 22 mmMaterial: galvanized steelRidder Art.-Nr.: 418095
0,00 €*