This cable can be perfectly applied for ventilation systems in greenhouses and other horticultural constructions.Material:Steel Galvanized

Use these cloth clips to attach your shade cloth quickly and easily to screen profiles and wires. The clips are made of plastic and therefore they are very gentle for fabrics. However these clips are useful not only in the greenhouse: they are suitable to fix other materials to wires as well as to thin metal plates .Material: Plastic

This lead edge tube clip 19 L connects support wire with 19 mm aluminium tubes in shading systems. Compared to the S 19 model, the clip L 19 provides a larger distance between the tube and wire. In some greenhouse types this ensures better sealing, when the energy screens are closed.

Use these plastic s-hooks Type II to attach shading screens to Inox-wire in suspended shading systems. Material: Plastic

Use these plastic s-hooks Type III to attach shading screens to Inox-wire in suspended shading systems. These hooks are especially suitable for thin fabrics, as they have a bar, which works as a barrier for the fabric. Material: Plastic

Is used for the attachement of 2 mm aircraft wire. Material: Steel Galvanized

The tube clip works as a gentle fixation for your fabrics to 17 and 19 mm steel and aluminium tubes. The clip is made of plastic, which won't damage the clamped fabric in contrast to the metal one. Material: plastic

With this Inox truss-clip you are able to attach poly wire firmly to the truss in shading systems. The truss clips are slipped on to the truss from beside and are deliverable in different heights.Material: stainless steel

Our screen hooks are used to fasten screens overhangs onto clip profile. The hook is equipped with a special self-locking fastener.

This plastic cloth clip attaches your fabrics onto screen profiles and wires in gentle and safe way.Its self-locking fastener and round shape provide a secure hold and prevent from release the fabric on its own. Material: Plastic

The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC

The sealing bracket seals the screen paths in suspended and lay-flat shading systems. This piece is made of plastic, that preserves the shade cloth. The bracket gets installed at the support wire to collect the following screen wih the help of the cord. Material: plastic

These springs are components for our slip joint. The slip joint comes standard with a soft spring.If one soft spring is not sufficient, you can use up to two hard pieces.

With the Inox Cloth Clip 3.8 fabrics can be attached to parts of the greenhouse construction, such as for example T-girders or bearers. Material: Stainless steel

With these crints poly wire is attached securely to the support wire bracket universal and afterwards it gets bolted. Material: Steel, galvanized

This inox tube clip provides perfect fixation for fabrics to 19 mm, especially if very firm hold is needed.Material: stainless steel

A durable, stainless aircraft cable for cable drive shadings systems. Thanks to these characteristics it specially fits external constructions. It is compatible with our slip joint. Tensile strength:Material: Stainless Steel

The wire guide protects the poly wire in lay-flat energy screens from friction, caused by the screen profile. In suspended systems it works as a connection between support wire and screen profile. The wire guide is installed into the screw channel and can slide sideways within it.Material: plastic

This lead edge cable clip EXT ensures a strong connection of the drive cable and the 19 mm tube. The extended form of this clip allows to avoid the contact between drive cable and fabric, that can cause damage of the fabric.For mounting M 4x16 ISK bolts are needed.

It is an element of clamp set for tubes 19 mm. In combination with the table clamp it connects push-pull tubes and aluminium tubes in push-pull drive system.Material: aluminium

This lead edge cable clip S 19 ensures a firm connection of the drive cable and the 19 mm tube. For mounting M 4x16 ISK bolts are needed.

The lead edge elbow fits 19 for 19 mm aluminium tubes, that are used for carrying shading screens. This piece is adjustable for any angle required in your shading system. Premounting can easily be done down on the ground . Precise adjustment has to be finished up at the mounting position. Mounting is realized via a plug-connection, which is fixed through stump bunch marking of the aluminium tube. Compatible with 19 mm aluminium tubes and steel tubes.

Our compact wire tigthener is very helpful by installing wires in narrow areas of shading systems and other constructions. The tightener provides more stable position of your cables and wires ,than other tigthener do.(Fixing only M6)