Filter
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Size Ø: 27
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
0,00 €*
Centerclip for centring shaft tube TUS 25-40- 50 pcs.
The center clip is used for centring the drive shaft during the installation of a weld coupling.When a damaged pinion needs to be replaced, the center clip enables to unclamp the drive shaft without demounting other pinions from the system. Material: Stainless SteelRidder art.-no.: 418694
0,00 €*
Counter-plate 45x45x5\D09\VZ
Counter plate is used as an insert for fixing RSD250 tooth-racked drives onto the truss.
0,00 €*
Tower Roller Plus Guide Rail L=6,0 m
Length (cm): 600
This rail is a guide for motor mount and counter-weight in Tower Roller Plus System. The counter-weight side of the rail is equipped with a slot for a plastic cover to be inserted as a protection from accidents. The guide rail can be attached very quickly into the Tower Roller System. It is very stable and perfectly suitable for roll-up screens.
0,00 €*
Sleeve coupling P26.5
This sleeve coupling is suitable for the drive shafts of 34 mm in push-pull drive tubes in shading and ventilation systems. It enables to unclamp the drive shaft from the system in case, for example, a damaged pinion should be replaced.. Material: galvanized steelRidder Art.-Nr.: 419404
0,00 €*
Clamping strip, PVC - 2-parts - L=2 m - PU = 100 pcs
Version: FN 19
This clamping strip is used to fix the greenhouse film to the aluminium Poly Lock Profile.
0,00 €*
aluminum poly lock profile - L = 6000 mm
The poly lock aluminium profile is a practical solution for fixing your greenhouse film. It can be screwed onto the greenhouse structure with a mouting bracket quickly and easily. The film is inserted into profile and afterwards fixed with the two-piece PVC clamping strips. The two-piece construction simplifies assembly and prevents damages.Material: aluminium
0,00 €*
Weld/sleeve coupling 1" - for 1" - tubular shaft P26.5\B1\L40\WELD
This weld coupling for pinion house unit RSD 250 suitable for steel tubes 1.315" or 1.66" is used in push-pull tube drives in shading and ventilation systems. Material: galvanized steelRidder Art.-Nr.: 401635
0,00 €*