The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC

The ventilation clamp connects the fabric guiding tubes and the push pull tubes in shading systems. In this function it works as a receptacle at the 27 mm steel tube for the parts, that push the ventilation to open it. Material: aluminium

Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.

The roll support universal works as a bearing for push pull tubes for truss-ventilations in all kinds of greenhouses. It is attached to the greenhouse construction with a M8-bolt. The replaceable diabolo rolls enable a flexible positioning of tubes of different sizes. Compatible with 27 and 32 mm tubes. Material: aluminium-housing with diabolo rolls made of plastic

The delay 27.32 is used in push-pull drive systems in greenhouses with a smaller last post distance.In these systems it works as a receptacle of 27 or 32 mm push-pull tubes and regulates the narrower shading screen .

The pinion house unit RSD 250-40 RR serves as a drive, which is placed underneath for push-pull shading systems. By standard it is equipped with mounting straps for truss on the right side. This position enables a very close mounting to the rack. On demand we are able to deliver the pinion house unit with straps on the left side or on both sides. Material: galvanized steel, pinions are hardend especially Ridder Art.-Nr.: 500280

The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet

Hebegurtführungsrolle for 20mm straps

Ridder Art.-Nr.: 182058

Ridder Art.-Nr.: 565020

The diabolo roll set 2 serves as a guide for push tubes in shading systems with push-pull tube drives. In this set the roll is built in into an iron sheet housing and equipped with a lateral guide. The side disks align the push-pull tube. Material: Diabolo roll: PlasticMounting disks:

Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.Comes in a bucket.Ridder item no .: 182051

The ventilation clamp connects the fabric guiding tubes and the push pull tubes in shading systems. In this function it works as a receptacle at the 32 mm steel tube for the parts, that push the ventilation to open it. Material: aluminium

This adaptor for rack is used in push pull shading systems to mount racks beneath the shadings screens.For distance of 160mm between screen profile and rack.

The vario-motor mounts enable you to flexibly attach your gear motors within the area of the truss in greenhouses. Thanks to a variable hole pattern the motor mount can be positioned at different heights of the truss. This component can be used in greenhouses with central drive and with gable end drive. Material: Galvanized steelRidder Art.-Nr. 503500

The roll support 80.40 works as a bearing for push pull tubes for truss-ventilations in greenhouses with truss. It is compatible with trusses of 80 x 40 mm and are easily clipped on top of them. The roll support can be used for tubes with different sizes as the diabolo rolls are mountable and very flexible. Compatible with 27 und 32 mm tubes. Material: aluminium-housing with diabolo rolls made of plastic

The roll support 60.40 works as a bearing for push pull tubes for truss-ventilations in greenhouses with truss. It is compatible with trusses of 60 x 40 mm and are easily clipped on top of them. The roll support can be used for tubes with different sizes as the diabolo rolls are mountable and very flexible. Compatible with 27 und 32 mm tubes. Material: aluminium-housing with diabolo rolls made of plastic

black

This diabolo roll serves as a guide for push tubes in shading systems with push-pull tube drives. This model is constructed with a rotatable plastic application and therefore it can be used in different mounting positions. Plastic lamination contributes for aligning the push-pull tubes. This diabolo roll is available on different mounting plates. Material: Diabolo roll: PlasticHousing: Iron Sheet