Filter
Cloth clips 22.3.3 black for 3 mm wire + Screen profile - PU = 2000 pcs
Color: black | PU: 2000
Use these cloth clips to attach your shade cloth quickly and easily to screen profiles and wires. The clips are made of plastic and therefore they are very gentle for fabrics. However these clips are useful not only in the greenhouse: they are suitable to fix other materials to wires as well as to thin metal plates .Material: Plastic
0,00 €*
lead edge tube clip 19 L - PU = 3000 pcs
PU (Pcs): 3000 | Version: L
This lead edge tube clip 19 L connects support wire with 19 mm aluminium tubes in shading systems. Compared to the S 19 model, the clip L 19 provides a larger distance between the tube and wire. In some greenhouse types this ensures better sealing, when the energy screens are closed.
0,00 €*
Tube clip 17 mm - For
PU (Pcs): 1
The tube clip works as a gentle fixation for your fabrics to 17 and 19 mm steel and aluminium tubes. The clip is made of plastic, which won't damage the clamped fabric in contrast to the metal one. Material: plastic
0,00 €*
Diabolo roll 27.32 - PU = 1000 pcs
PU (Pcs): 1000
The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
0,00 €*
Sealing bracket for 2 mm inox wire - PU = 200 pcs
PU (Pcs): 200
The sealing bracket seals the screen paths in suspended and lay-flat shading systems. This piece is made of plastic, that preserves the shade cloth. The bracket gets installed at the support wire to collect the following screen wih the help of the cord. Material: plastic
0,00 €*
Tube clip, stainless - PU = 500 pcs
PU (Pcs): 500
This inox tube clip provides perfect fixation for fabrics to 19 mm, especially if very firm hold is needed.Material: stainless steel
0,00 €*
Lead edge elbow fits 19 - PU = 250 pcs
PU (Pcs): 250
The lead edge elbow fits 19 for 19 mm aluminium tubes, that are used for carrying shading screens. This piece is adjustable for any angle required in your shading system. Premounting can easily be done down on the ground . Precise adjustment has to be finished up at the mounting position. Mounting is realized via a plug-connection, which is fixed through stump bunch marking of the aluminium tube. Compatible with 19 mm aluminium tubes and steel tubes.
0,00 €*
Lead edge connector 19 L - PU = 300 pcs
PU (Pcs): 300 | Version: L
The lead edge connector 19 L is a convenient, static connection for 19 mm aluminium and steel tubes. The piece is so designed that it can be plugged and fixed with the tongs. Compared to a commonly used bolting-connectors this one can be mounted quicker and easier. However the tubes cannot be disconnected from each other.
0,00 €*
wire support bracket 50.50
PU (Pcs): 1
The support wire bracket is used for easy fixing of inox- wire onto square tube.The wire bracket gets clipped and screwed onto the square tube. Thanks to this fixation it can withstand high tension. For screwing you will need a M 6x65-bolt which is not delivered with the product.
0,00 €*
TGU shaft hanger-set - PU = 25 pcs
PU (Pcs): 25
Application:1. Fast, easy replacement of broken shaft hangers.2. Sturdy and durable components for new and old greenhouses.3. Designed to fit most greenhouses, it can also be customized on demand.Benefits:• Less labor on repairs. No need to dismantle the shaft, our unique hangers are assembled around it - it’s a one-man job!• Adds flexibility to the construction of new systems in existing and new buildings.• Extends the life of other related parts (motors, drive pipes, structure stability) due to the specially formulated inner plastic ring which serves as bearing support and holds the drive line in its optimal position.• A better alternative to a standard support plate and other shaft hangers.• Makes complicated drive line repairs easy!
0,00 €*
Pillow block 1" with bearing
Bearing: 6207 ZZ
The pillow block with a double-shell stamped metal bracket works as a support point for 34 mm drive shafts for ventilation- and shading-systems in greenhouses. The pillow block has mounting holes for M8 bolts.Thanks to its double-shell construction the ball bearing within the bracket can be replaced, if needed. The product can be delivered with a usual ball bearing SB 207 (24000101) or with a ball bearing with a longer inner ring UB 207 (24000101).Material: Galvanized steel (housing & bearing)
0,00 €*
diabolo-roll 27.32 with stamped metal housing
PU (Pcs): 1
The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet
0,00 €*
Tube connectors halfs 1" - incl. 4 bolts M8 x 45 - PU = 25 Sets
PU: 25
These tube connector halves are used for reliable connection of 34 mm steel tubes for drive shafts. Compared to heat-welded connection our tube connector halves offer higher stability and durability. The connector halves are bolted to the steel tubes with the included M8x50 bolts. Material: Steel, galvanized
0,00 €*
Offset bearing 1" - 55/34 - PU = 25 pcs
PU (Pcs): 1
The offset bearing is suitable for suspended shading systems with gable end drive. It sets the drive shaft to the optimal position and enables its rotation. The bearing holds tensile load.Material: Impact-resistant plastic
0,00 €*
4 bearing shaft support 1" extended - PU = 20 pcs
PU (Pcs): 20 | Version: long
The 4 bearing shaft support has been developed for central drives in lay flat and in suspended shading systems. It works as a bearing point in the system and brings the drive shaft to an optimal position within the system. Short version for 34 mm tubes
0,00 €*
Slide bearing plate straight B1'' - B1\B077\L107
Length: B077\L107 | Version: Straight
Mounting height: Lower edge to middle of drive shaft 77 mmRidder Art.-Nr.: 503095
0,00 €*
Offset bearing 1" - 50/50 - PU = 25 pcs
PU (Pcs): 25
This offset bearing has been developed for suspended shading systems with gable end drive. It brings the drive shaft to an optimal position and as a support point enables its rotation. The product has been built to hold trailing load. Material: High impact reistant plastic For mounting you will need the following parts: - M 8 x 70 bolt - M8 nyloc nut
0,00 €*
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Size Ø: 27
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
0,00 €*
Diabolo roll 27.32 - with stamped metal bracket sideguides - PU = 50 pcs
PU (Pcs): 50
The diabolo roll set 2 serves as a guide for push tubes in shading systems with push-pull tube drives. In this set the roll is built in into an iron sheet housing and equipped with a lateral guide. The side disks align the push-pull tube. Material: Diabolo roll: PlasticMounting disks:
0,00 €*