Filter
Pinion house unit for rack Ridder TU6-30
Version: TU6-30
The pinion house unit TU 6-30 works as a drive for racks 30 in greenhouse ventilations. A counter roller enables reliable and gentle guidance of the rack. Therefore you will profit from low abrasion of your ventilation system.Thanks to a centred bronze ring, that works as a bearing, the pinion house unit especially fits simple and light-weight ventilation systems. For drives with 34 mm steel tubes. Material: Steel housing with a plastic bearing Ridder Art.-Nr.: 500018
0,00 €*
Rack 30-3\792 mm \ Ridder TU11-30
Length (mm): 792 | Version: Straight
This rack is especially suitable for standard ventilation in all types of greenhouses.The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 30 mmMaterial: galvanized steelRidder Art.-Nr.: 418546
0,00 €*
Grease waterproof 400 g - PU = 24 pcs
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.
0,00 €*
Rack 22-3\1546mm \ Ridder TU11-22
Length (mm): 1546 | Version: Straight
This rack is especially suitable for light-weight ventilation in poly tunnels and -greenhouses. The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 22 mmMaterial: galvanized steelRidder Art.-Nr.: 418095
0,00 €*
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Size Ø: 27
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
0,00 €*
Grease waterproof 5 Kg
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.Comes in a bucket.Ridder item no .: 182051
0,00 €*
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
The pinion house unit TU 21-40 is used as a direct drive for shading systems with push-pull tube drives. Material: galvanized steel, pinions are hardend especially
0,00 €*
Counter-plate 45x45x5\D09\VZ
Counter plate is used as an insert for fixing RSD250 tooth-racked drives onto the truss.
0,00 €*
Safety cover for racks - Extension 50 cm
This article can be added to your safety sets for racks (three and four parts). Order the extension that you need on top of the standard one meter covers, and we will cut the covers to the requested length.
0,00 €*
Weld/sleeve coupling 1" - for 1" - tubular shaft P26.5\B1\L40\WELD
This weld coupling for pinion house unit RSD 250 suitable for steel tubes 1.315" or 1.66" is used in push-pull tube drives in shading and ventilation systems. Material: galvanized steelRidder Art.-Nr.: 401635
0,00 €*
Sleeve coupling P26.5
This sleeve coupling is suitable for the drive shafts of 34 mm in push-pull drive tubes in shading and ventilation systems. It enables to unclamp the drive shaft from the system in case, for example, a damaged pinion should be replaced.. Material: galvanized steelRidder Art.-Nr.: 419404
0,00 €*
Centerclip for centring shaft tube TUS 25-40- 50 pcs.
The center clip is used for centring the drive shaft during the installation of a weld coupling.When a damaged pinion needs to be replaced, the center clip enables to unclamp the drive shaft without demounting other pinions from the system. Material: Stainless SteelRidder art.-no.: 418694
0,00 €*
Insect protection screen - no thrips 0,163 x 0,163 mm weight: 132 g/m
Our woven insect screen with a mesh size of 0.163 x 0.163 mm and a length of 200 cm protects your greenhouse from insects and other small pests. Thrips in particular are kept away thanks to the particularly narrow mesh size. The fabric is easy to cut and can be assembled very quickly. We recommend our heat cutter (Article #) for cutting to prevent the fabric from fraying.
0,00 €*