Rack H40-3\L4147 mm \ Ridder RSD250 and TU21-40
Save as PDF
Product number: 32104166
Product information "Rack H40-3\L4147 mm \ Ridder RSD250 and TU21-40"
These Racks are used to move push-pull tubes in drives for shading systems. They are equipped with a perforation which is used to hold the coupling piecd.
The racks are available in different lengths.
Material: galvanized steel
Ridder Art.-Nr. 413961
The racks are available in different lengths.
Material: galvanized steel
Ridder Art.-Nr. 413961
Customers who buyed this item also buyed:
Ridder pinion house unit RSD 250-40/RR - PU = 12 pcs
The pinion house unit RSD 250-40 RR serves as a drive, which is placed underneath for push-pull shading systems. By standard it is equipped with mounting straps for truss on the right side. This position enables a very close mounting to the rack. On demand we are able to deliver the pinion house unit with straps on the left side or on both sides. Material: galvanized steel, pinions are hardend especially Ridder Art.-Nr.: 500280
0,00 €*
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
The pinion house unit TU 21-40 is used as a direct drive for shading systems with push-pull tube drives. Material: galvanized steel, pinions are hardend especially
0,00 €*
Grease waterproof 400 g - PU = 24 pcs
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.
0,00 €*