Adaptor extended - Tube 27 x 1,5 galvanized

This steel tube is particular stable. It is used as a push-pull-tube for shading- and ventilation systems in greenhouses. The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt and nut 27.32 for steel tubes are needed.Diameter: 27 mm Wall thickness: 1.5 mm Length: 6500 mm Material: Galvanized Steel

For automatically or manually operated drive systems to open and close side ventilation. The telescopic shaft is particularly suitable for operating in lightweight greenhouses such as poly greenhouses.Its stable aluminium housing in combination with the stainless steel piston rod ensures a maintenance-free and stable operation. It provides an extremely simple assembly owning to the reliable coupling with two flats. The Trans Axle Unit fits permanently mounted motors. Maximum driving range is of 34 °.

For automatically or manually operated drive systems to open and close side ventilation. The telescopic shaft is particularly suitable for operating in lightweight greenhouses such as poly greenhouses.Its stable aluminium housing in combination with the stainless steel piston rod ensures a maintenance-free and stable operation. It provides an extremely simple assembly owning to the reliable coupling with two flats. The Trans Axle Unit fits permanently mounted motors. Maximum driving range is of 34 °.

This manual gear perfectly fits the needs of smaller shading and ventilation systems. It is equipped with a coupling which can be directly bolted to the TGU telescopic shaft or another drive shaft. The drive gets delivered with a matching hand-crank. On your request this gear can be also delivered with an extended hand-crank or with a hook for drives that are placed very high and therefore can not be reached directly. Combined with our chain wheel even gears that are placed very high can be reached.

This manual gear perfectly fits the needs of smaller shading and ventilation systems. It is equipped with a coupling which can be directly bolted to the TGU telescopic shaft or another drive shaft. The drive gets delivered with a matching hand-crank. On your request this gear can be also delivered with an extended hand-crank or with a hook for drives that are placed very high and therefore can not be reached directly. Combined with our chain wheel even gears that are placed very high can be reached.