Service-Hotline: +1 610 498 4474

Fiberlane LLC - 9254 Richmond Road - 18013 Bangor, PA
Email: info@fiberlanellc.com
Service-Hotline: +1 610 498 4474

Filter
Diabolo roll 27.32 - PU = 1000 pcs
Diabolo roll 27.32 - PU = 1000 pcs
PU (Pcs): 1000
The clip profile protects ?loth overhangs in shading systems in greenhouses.It is clipped directly onto the tensioned coated cable to prevent screens rubbing against the wire.Material: PVC
0,00 €*
Pillow block 1" with bearing
Pillow block 1" with bearing
Bearing: 6207 ZZ
The pillow block with a double-shell stamped metal bracket works as a support point for 34 mm drive shafts for ventilation- and shading-systems in greenhouses. The pillow block has mounting holes for M8 bolts.Thanks to its double-shell construction the ball bearing within the bracket can be replaced, if needed. The product can be delivered with a usual ball bearing SB 207 (24000101) or with a ball bearing with a longer inner ring UB 207 (24000101).Material: Galvanized steel (housing & bearing)
0,00 €*
Pinion house unit for rack Ridder TU6-30
Pinion house unit for rack Ridder TU6-30
Version: TU6-30
The pinion house unit TU 6-30 works as a drive for racks 30 in greenhouse ventilations. A counter roller enables reliable and gentle guidance of the rack. Therefore you will profit from low abrasion of your ventilation system.Thanks to a centred bronze ring, that works as a bearing, the pinion house unit especially fits simple and light-weight ventilation systems. For drives with 34 mm steel tubes. Material: Steel housing with a plastic bearing Ridder Art.-Nr.: 500018
0,00 €*
Grease waterproof 400 g - PU = 24 pcs
Grease waterproof 400 g - PU = 24 pcs
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.The grease comes in a cartridge and is compatible with 400 g-grease guns.
0,00 €*
Rack 30-3\792 mm \ Ridder TU11-30
Rack 30-3\792 mm \ Ridder TU11-30
Length (mm): 792 | Version: Straight
This rack is especially suitable for standard ventilation in all types of greenhouses.The end piece of the rack has no teeth. This enables a security stop as soon as the vent has opened to the maximum. It also stops the rack from getting pushed out. The rack is precisely fitted to the pinion housing TU 11:22 & 30 and therefore very durable. The product can be delivered in several lengths. Height of the teeth: 30 mmMaterial: galvanized steelRidder Art.-Nr.: 418546
0,00 €*
Window connector for TU11-22 +TU11-30PU = 10 pcs
Window connector for TU11-22 +TU11-30PU = 10 pcs
The window bracket help to fix racks to the ventilation flap in greenhouse ventilations. The included Inox M6-bolt fixes the rack reliably into the connector. To fix the bracket to the ventilation flap, two further M& bolts are needed. These are not included.Material: aluminium pressure-castingRidder Art.-Nr.: 500021
0,00 €*
diabolo-roll 27.32 with stamped metal housing
diabolo-roll 27.32 with stamped metal housing
PU (Pcs): 1
The diabolo roll set 1 serves as a guide for push tubes in shading systems with push-pull tube drives. Within this set the roll is built into an iron sheet housing.Material:Diabolo roll: PlasticHousing: Iron Sheet
0,00 €*
Diaboloroll for 42 mm tube, black
Diaboloroll for 42 mm tube, black
Hebegurtführungsrolle for 20mm straps
0,00 €*
Rack 30-2\L1345mm\ Ridder TU11-30
Rack 30-2\L1345mm\ Ridder TU11-30
Length (mm): 1345
Ridder art.-no..: 425429
0,00 €*
Slide bearing plate straight B1'' - B1\B077\L107
Slide bearing plate straight B1'' - B1\B077\L107
Length: B077\L107 | Version: Straight
Mounting height: Lower edge to middle of drive shaft 77 mmRidder Art.-Nr.: 503095
0,00 €*
Steel tube galv. narrowed, 1'' / 2,5mm - L= 6,50 m - Bundle = 81pcs
Steel tube galv. narrowed, 1'' / 2,5mm - L= 6,50 m - Bundle = 81pcs
PU: Bunch
This steel tube is used as a drive shaft for ventilation systems and large shading systems in greenhouses.Due to its wall-thickness of 2,50 mm, it is resistant against torsion.The tubes can be easily connected by inserting them into each other through their swaged ends and bolting them afterwards. Bolt M8 x 50 with a nyloc nut M8 are neededDiameter: 1 Wall thickness: 2.5 mmLength: 6500 mmMaterial: Galvanised Steel
0,00 €*
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Coupling unit PH40\B27x1.5\ST - to connect rack PH 40-3 with push-pull tube d. 27 mm
Size Ø: 27
Ridder "connector set" for acks and push-pull tubes in shading systems.Suitable for 27 racks. Material: pressure casting galvanized - Ridder Art.-Nr.: 500208
0,00 €*
Grease waterproof 400 gr.
Grease waterproof 400 gr.
Ridder Art.-Nr.: 182058
0,00 €*
Steel tube, galvanized 1"
Steel tube, galvanized 1"
PU: Bunch
This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized
0,00 €*
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
Pinion house unit Ridder TU21-40 - Ridder Art.-Nr.: 500040
The pinion house unit TU 21-40 is used as a direct drive for shading systems with push-pull tube drives. Material: galvanized steel, pinions are hardend especially
0,00 €*
Grease waterproof 5 Kg
Grease waterproof 5 Kg
Professional rack grease for maintenance of racks in ventilation and shading systems in greenhouses. Annual greasing ensures long-term, trouble-free operation of the rack drives.The grease can be applied to the racks with a brush.Comes in a bucket.Ridder item no .: 182051
0,00 €*
Rack m4/b20 Ridder / L1400 mm
Rack m4/b20 Ridder / L1400 mm
Length (mm): 1400
Ridder Art.-Nr. 416922
0,00 €*
Grommet 8.8 - push pull guide - PU = 100 pcs
Grommet 8.8 - push pull guide - PU = 100 pcs
The Grommet works as a sliding component in two tubes, that are slid into each other. It supports the tubes smooth movement and is a substitute for grease, which can cause dirtying in your greenhouse. Material: Plastic
0,00 €*
Pinion house protection cover - PU = 25 pcs
Pinion house protection cover - PU = 25 pcs
The pinion house protection cover combined with safety covers for racks enables to protect racks in sensitive positions in greenhouses. These can be for example positions with a higher risk for injuries or dirtying, caused by grease .The protection cover is made of plastic and on one side equipped with a receptacle for safety covers for racks. Material: Plastic
0,00 €*
Steel tube, galv. 5/4"
Steel tube, galv. 5/4"
This steel tube is used as a drive shaft in shading and outdated ventilation systems in greenhouses. Due to wall thickness of 3.65 mm, it is resistant against torsion.Our tube connector halves can be used to connect the tubes. Diameter: 60.5 mm Wall thickness: 3.65 mm Length: 6000 mm Material: Galvanized Steel
0,00 €*
Counter-plate 45x45x5\D09\VZ
Counter-plate 45x45x5\D09\VZ
Counter plate is used as an insert for fixing RSD250 tooth-racked drives onto the truss.
0,00 €*